SEK Surebond SB-6000 P Wet Look Sealer Water-Based, Water-Based Polymer Blend Resin, Darkening

SB-6000 is a Wet Look Sealer ideal for concrete and clay pavers, flat and stamped concrete, and natural and manufactured stone. Also suitable for masonry, retaining walls, porous or unglazed tile and terrazzo. Not recommended for marble, granite or ceramic tile. ALWAYS TEST FIRST. SB-6000 is a proprietary water-based, modified latex, exterior quality sealer. SB-6000 will seal and enhance the beauty of new and old surfaces with a “wet look” including pronounced color enhancement and satin finish. It is breathable and will not trap naturally occurring efflorescence, allowing it to be applied immediately after new paving stones are installed. SB-6000 improves surface durability and freeze-thaw resistance while protecting the surface from salt, acid and staining. It exceeds all VOC, EPA and OSHA standards. SB-6000 Wet Look Sealer has the consistency of water and is milky white when applied; it dries to a clear, wet look on the surface of the pavement. SB-6000 Wet Look sealer can be used both inside and outside on old and new pavements. One gallon coverage rate: Pavers and Other Hardscape Surfaces 100 - 200 sf, Concrete 150 - 250 sf, Retaining Walls and Other Vertical Surfaces 100 - 200 sf. Two coats of SB-6000 are recommended. Allow first coat to dry before applying second coat. Second coat coverage is estimated between 200-300 sq. ft. per gallon. Actual coverage may vary depending on the type, age, condition, porosity of the surface, application method and other local conditions such as temperature and humidity.

• One Five Gallon Pail - Breathable Water Based Sealer
• Deeply Enhances Surface Tone With Satin Finish
• Protects Surface by Resisting Water, Stains and Salt
• Promotes Easier Cleaning and Maintenance
• Low VOC Formula